Annex 5. Technical Requirements for Protective Structures (Elements)
Technical requirements for protective structures and elements of shooting ranges for practical shooting.
Annex 5. Technical requirements for protective structures (elements)
to the Official Rules
for practical shooting sport competitions
Technical requirements for protective structures (elements) of semi-open shooting ranges (shooting ranges) for practical shooting
Table 1
Height of protective structures (elements) for firing a carbine and a smoothbore shotgun
| Shooting distance, m | Minimum height H, m |
|---|---|
| Up to 25 | 3,00 |
| from 25including to 50 | 4,00 |
| from 50 including to 100 | 6,00 |
| from 100 including to 200 | 7,5 |
| from 200 including to 300 | 10,00 |
Table 2
Height of protective constructions (elements) for shooting of the handgun, carbine under the handgun cartridge, small-caliber carbine
| Shooting distance, m | Minimum height H, m |
|---|---|
| Up to 15 | 3,00 |
| From 15 including to25 | 4,00 |
| From 25 including to 50 | 5,00 |
| over 50 | 6,00 |
Table 3
Requirements for the design of protective structures (elements), depending on the type of firearm and caliber of ammunition
Thickness of protective structures (elements), cm, by type and caliber of ammunition and type of firearm
| Material | Carbine from 7.62x54 to 12.7 × 99 mm NATO | carbine 7.62x39 | carbine 5,45х39 and 5,56х45 (cal.223) | carbine 5,6mm (cal.22) | handgun and carbine for handgun cartridge, all calibers | smoothbore shotgun, up to 12 caliber inclusive, fraction | smoothbore shotgun, up to 12 caliber inclusive, canister | smoothbore shotgun, up to 12 caliber inclusive, bullet |
|---|---|---|---|---|---|---|---|---|
| Concrete brands 350 (В25) | 30 | 8 | 8 | 7 | 7 | 7 | 7 | 15 |
| Brick М100 | 80 | 38 | 38 | 25 | 25 | 25 | 25 | 25 |
| Wood | 100 | 50 | 50 | 25 | 10 | 5 | 10 | 15 |
| Maul*) | 100 | 80 | 80 | 50 | 20 | 20 | 20 | 20 |
| Sand (compacted) **) | 100 | 60 | 60 | 30 | 10 | 10 | 10 | 20 |
| Vegetable soil *) | 120 | 80 | 80 | 50 | 30 | 20 | 20 | 50 |
*) Used in embankments. The given thickness applies to the upper edge of the shaft.
**) Thickness for layered material filled between two wooden walls 5 cm thick.